VolumeProperty Struct
The data volume configuration for tasks launched using this task definition.
Specifying a volume configuration in a task definition is optional. The volume configuration may contain multiple volumes but only one volume configured at launch is supported. Each volume defined in the volume configuration may only specify a name and one of either configuredAtLaunch , dockerVolumeConfiguration , efsVolumeConfiguration , fsxWindowsFileServerVolumeConfiguration , or host . If an empty volume configuration is specified, by default Amazon ECS uses a host volume. For more information, see Using data volumes in tasks .
| Source | |
|---|---|
| Type last changed |
Example
// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import { aws_ecs as ecs } from 'aws-cdk-lib';
const volumeProperty: ecs.CfnTaskDefinition.VolumeProperty = {
configuredAtLaunch: false,
dockerVolumeConfiguration: {
autoprovision: false,
driver: 'driver',
driverOpts: {
driverOptsKey: 'driverOpts',
},
labels: {
labelsKey: 'labels',
},
scope: 'scope',
},
efsVolumeConfiguration: {
filesystemId: 'filesystemId',
// the properties below are optional
authorizationConfig: {
accessPointId: 'accessPointId',
iam: 'iam',
},
rootDirectory: 'rootDirectory',
transitEncryption: 'transitEncryption',
transitEncryptionPort: 123,
},
fSxWindowsFileServerVolumeConfiguration: {
fileSystemId: 'fileSystemId',
rootDirectory: 'rootDirectory',
// the properties below are optional
authorizationConfig: {
credentialsParameter: 'credentialsParameter',
domain: 'domain',
},
},
host: {
sourcePath: 'sourcePath',
},
name: 'name',
s3FilesVolumeConfiguration: {
fileSystemArn: 'fileSystemArn',
// the properties below are optional
accessPointArn: 'accessPointArn',
rootDirectory: 'rootDirectory',
transitEncryptionPort: 123,
},
};
# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_ecs as ecs
volume_property = ecs.CfnTaskDefinition.VolumeProperty(
configured_at_launch=False,
docker_volume_configuration=ecs.CfnTaskDefinition.DockerVolumeConfigurationProperty(
autoprovision=False,
driver="driver",
driver_opts={
"driver_opts_key": "driverOpts"
},
labels={
"labels_key": "labels"
},
scope="scope"
),
efs_volume_configuration=ecs.CfnTaskDefinition.EFSVolumeConfigurationProperty(
filesystem_id="filesystemId",
# the properties below are optional
authorization_config=ecs.CfnTaskDefinition.AuthorizationConfigProperty(
access_point_id="accessPointId",
iam="iam"
),
root_directory="rootDirectory",
transit_encryption="transitEncryption",
transit_encryption_port=123
),
f_sx_windows_file_server_volume_configuration=ecs.CfnTaskDefinition.FSxWindowsFileServerVolumeConfigurationProperty(
file_system_id="fileSystemId",
root_directory="rootDirectory",
# the properties below are optional
authorization_config=ecs.CfnTaskDefinition.FSxAuthorizationConfigProperty(
credentials_parameter="credentialsParameter",
domain="domain"
)
),
host=ecs.CfnTaskDefinition.HostVolumePropertiesProperty(
source_path="sourcePath"
),
name="name",
s3_files_volume_configuration=ecs.CfnTaskDefinition.S3FilesVolumeConfigurationProperty(
file_system_arn="fileSystemArn",
# the properties below are optional
access_point_arn="accessPointArn",
root_directory="rootDirectory",
transit_encryption_port=123
)
)
// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import software.amazon.awscdk.services.ecs.*;
VolumeProperty volumeProperty = VolumeProperty.builder()
.configuredAtLaunch(false)
.dockerVolumeConfiguration(DockerVolumeConfigurationProperty.builder()
.autoprovision(false)
.driver("driver")
.driverOpts(Map.of(
"driverOptsKey", "driverOpts"))
.labels(Map.of(
"labelsKey", "labels"))
.scope("scope")
.build())
.efsVolumeConfiguration(EFSVolumeConfigurationProperty.builder()
.filesystemId("filesystemId")
// the properties below are optional
.authorizationConfig(AuthorizationConfigProperty.builder()
.accessPointId("accessPointId")
.iam("iam")
.build())
.rootDirectory("rootDirectory")
.transitEncryption("transitEncryption")
.transitEncryptionPort(123)
.build())
.fSxWindowsFileServerVolumeConfiguration(FSxWindowsFileServerVolumeConfigurationProperty.builder()
.fileSystemId("fileSystemId")
.rootDirectory("rootDirectory")
// the properties below are optional
.authorizationConfig(FSxAuthorizationConfigProperty.builder()
.credentialsParameter("credentialsParameter")
.domain("domain")
.build())
.build())
.host(HostVolumePropertiesProperty.builder()
.sourcePath("sourcePath")
.build())
.name("name")
.s3FilesVolumeConfiguration(S3FilesVolumeConfigurationProperty.builder()
.fileSystemArn("fileSystemArn")
// the properties below are optional
.accessPointArn("accessPointArn")
.rootDirectory("rootDirectory")
.transitEncryptionPort(123)
.build())
.build();
// Install: dotnet add package Amazon.CDK.Lib
// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
using Amazon.CDK.AWS.ECS;
var volumeProperty = new VolumeProperty {
ConfiguredAtLaunch = false,
DockerVolumeConfiguration = new DockerVolumeConfigurationProperty {
Autoprovision = false,
Driver = "driver",
DriverOpts = new Dictionary<string, string> {
{ "driverOptsKey", "driverOpts" }
},
Labels = new Dictionary<string, string> {
{ "labelsKey", "labels" }
},
Scope = "scope"
},
EfsVolumeConfiguration = new EFSVolumeConfigurationProperty {
FilesystemId = "filesystemId",
// the properties below are optional
AuthorizationConfig = new AuthorizationConfigProperty {
AccessPointId = "accessPointId",
Iam = "iam"
},
RootDirectory = "rootDirectory",
TransitEncryption = "transitEncryption",
TransitEncryptionPort = 123
},
FSxWindowsFileServerVolumeConfiguration = new FSxWindowsFileServerVolumeConfigurationProperty {
FileSystemId = "fileSystemId",
RootDirectory = "rootDirectory",
// the properties below are optional
AuthorizationConfig = new FSxAuthorizationConfigProperty {
CredentialsParameter = "credentialsParameter",
Domain = "domain"
}
},
Host = new HostVolumePropertiesProperty {
SourcePath = "sourcePath"
},
Name = "name",
S3FilesVolumeConfiguration = new S3FilesVolumeConfigurationProperty {
FileSystemArn = "fileSystemArn",
// the properties below are optional
AccessPointArn = "accessPointArn",
RootDirectory = "rootDirectory",
TransitEncryptionPort = 123
}
};
// Install: go get github.com/aws/aws-cdk-go/awscdk/v2
// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"
volumeProperty := &VolumeProperty{
ConfiguredAtLaunch: jsii.Boolean(false),
DockerVolumeConfiguration: &DockerVolumeConfigurationProperty{
Autoprovision: jsii.Boolean(false),
Driver: jsii.String("driver"),
DriverOpts: map[string]*string{
"driverOptsKey": jsii.String("driverOpts"),
},
Labels: map[string]*string{
"labelsKey": jsii.String("labels"),
},
Scope: jsii.String("scope"),
},
EfsVolumeConfiguration: &EFSVolumeConfigurationProperty{
FilesystemId: jsii.String("filesystemId"),
// the properties below are optional
AuthorizationConfig: &AuthorizationConfigProperty{
AccessPointId: jsii.String("accessPointId"),
Iam: jsii.String("iam"),
},
RootDirectory: jsii.String("rootDirectory"),
TransitEncryption: jsii.String("transitEncryption"),
TransitEncryptionPort: jsii.Number(123),
},
FSxWindowsFileServerVolumeConfiguration: &FSxWindowsFileServerVolumeConfigurationProperty{
FileSystemId: jsii.String("fileSystemId"),
RootDirectory: jsii.String("rootDirectory"),
// the properties below are optional
AuthorizationConfig: &FSxAuthorizationConfigProperty{
CredentialsParameter: jsii.String("credentialsParameter"),
Domain: jsii.String("domain"),
},
},
Host: &HostVolumePropertiesProperty{
SourcePath: jsii.String("sourcePath"),
},
Name: jsii.String("name"),
S3FilesVolumeConfiguration: &S3FilesVolumeConfigurationProperty{
FileSystemArn: jsii.String("fileSystemArn"),
// the properties below are optional
AccessPointArn: jsii.String("accessPointArn"),
RootDirectory: jsii.String("rootDirectory"),
TransitEncryptionPort: jsii.Number(123),
},
}
Properties
configuredAtLaunchoptionalboolean | IResolvableconfigured_at_launchoptionaltyping.Union[bool, IResolvable]configuredAtLaunchoptionalBooleanConfiguredAtLaunchoptionalboolConfiguredAtLaunchoptionalinterface{} #notes
This is used to create Amazon EBS volumes for standalone tasks or tasks created as part of a service. Each task definition revision may only have one volume configured at launch in the volume configuration.
To configure a volume at launch time, use this task definition revision and specify a volumeConfigurations object when calling the CreateService , UpdateService , RunTask or StartTask APIs.
dockerVolumeConfigurationoptionalIResolvable | CfnTaskDefinition.docker_volume_configurationoptionaltyping.Union[IResolvable, DockerVolumeConfigurationProperty]dockerVolumeConfigurationoptionalIResolvableDockerVolumeConfigurationoptionalIResolvableDockerVolumeConfigurationoptionalinterface{} #Windows containers only support the use of the local driver. To use bind mounts, specify the host parameter instead.
Docker volumes aren't supported by tasks run on AWS Fargate .
efsVolumeConfigurationoptionalIResolvable | CfnTaskDefinition.efs_volume_configurationoptionaltyping.Union[IResolvable, EFSVolumeConfigurationProperty]efsVolumeConfigurationoptionalIResolvableEfsVolumeConfigurationoptionalIResolvableEfsVolumeConfigurationoptionalinterface{} #fSxWindowsFileServerVolumeConfigurationoptionalIResolvable | CfnTaskDefinition.f_sx_windows_file_server_volume_configurationoptionaltyping.Union[IResolvable, FSxWindowsFileServerVolumeConfigurationProperty]fSxWindowsFileServerVolumeConfigurationoptionalIResolvableFSxWindowsFileServerVolumeConfigurationoptionalIResolvableFSxWindowsFileServerVolumeConfigurationoptionalinterface{} #hostoptionalIResolvable | CfnTaskDefinition.hostoptionaltyping.Union[IResolvable, HostVolumePropertiesProperty]hostoptionalIResolvableHostoptionalIResolvableHostoptionalinterface{} #notes
The contents of the host parameter determine whether your bind mount host volume persists on the host container instance and where it's stored. If the host parameter is empty, then the Docker daemon assigns a host path for your data volume. However, the data isn't guaranteed to persist after the containers that are associated with it stop running.
Windows containers can mount whole directories on the same drive as $env:ProgramData . Windows containers can't mount directories on a different drive, and mount point can't be across drives. For example, you can mount C:\my\path:C:\my\path and D:\:D:\ , but not D:\my\path:C:\my\path or D:\:C:\my\path .
notes
When using a volume configured at launch, the name is required and must also be specified as the volume name in the ServiceVolumeConfiguration or TaskVolumeConfiguration parameter when creating your service or standalone task.
For all other types of volumes, this name is referenced in the sourceVolume parameter of the mountPoints object in the container definition.
When a volume is using the efsVolumeConfiguration , the name is required.
s3FilesVolumeConfigurationoptionalIResolvable | CfnTaskDefinition.s3_files_volume_configurationoptionaltyping.Union[IResolvable, S3FilesVolumeConfigurationProperty]s3FilesVolumeConfigurationoptionalIResolvableS3FilesVolumeConfigurationoptionalIResolvableS3FilesVolumeConfigurationoptionalinterface{} #notes
For more information, see Amazon S3 Files volumes in the Amazon Elastic Container Service Developer Guide. Your task definition must include a Task IAM Role. See IAM role for attaching your file system to compute resources for required permissions.